Turns
November 12, 2018 at 2:28 pm,
No comments
Using your turn signals is important for all your driving test maneuvers. It helps let other drivers know what you are planning on doing. Make sure that you turn your turn signal on plenty of time before you are actually going to turn. This will give other drivers a chance to notice and plan accordingly.
Make sure that you don’t use your blinker when you don’t need to and that you don’t turn them on too early. This can confuse other drivers.
When taking your test, use your turn signal any time that you are going to turn the wheel of your car unless you are following a curve in the road. You should even signal before turning into your parking space at the end of the test.
When making a left hand turn, make sure that you do not turn your wheels while waiting. Instead, pull up to the junction, wait until it is safe to turn, and then turn your wheel as you make the turn. Check here how to yield correctly to pass the exam:When making a right hand turn, stop before you turn if necessary.
If you turn right, make sure that you turn into the lane that is the furthest right. If you turn left, turn into the lane that is the furthest left. If you need to be in another lane, wait until it is safe and then signal and change lanes.
Take turns slowly. If you are going to be turning, you should slow down.
Pay attention to traffic when turning. If you can’t get your vehicle into the lane and up to speed before the oncoming cars arrive, wait until you can. Other vehicles should never have to use their brakes to accommodate your turn.
Make sure that you use the appropriate blinker when turning. Flick your signal up for right hand turns and down for left hand turns. A clever way to remember which is which is to think about the word “upright”.
Always check your blind spot when changing lanes. It is a good idea to check over your shoulder around the same time that you turn on your signal. If it is clear you can change lanes, if not -- wait until you can safely change lanes. Keep your signal on until you are safely in your new lane.
Observation
Did you know that your test administrator is going to be watching you to see how well you observe and interact with other vehicles? Make sure that you pay attention and that you use your mirrors.
Always check your blind spot before you signal to change lanes.
As you approach intersections, scan them with your eyes quickly. Look for children, other vehicles and anything that could potentially become a danger. Always scan the intersection before you enter it.
Use your mirrors. As you drive, glance briefly into your mirrors every 5 seconds or so. You should also check your mirrors after every turn and quickly check your rearview before you put on the brakes, especially if it will be a sudden braking.
Watch for children, pedestrians, bicycles and motorcyclists. Make sure that you drive safely when you are around them.
Traffic signs are very important. Make sure that you watch for them and that you follow their instructions.
Your peripheral vision will help you to notice hazards before they become a problem. Make sure that you use it and pay attention to what is going on all around you, not just in front of you.
As you drive, look as far up the road as you can. Pay attention at all times.